• Incremental Corrections–dimensions can be corrected by adding or subtracting incrementally from the existing dimension.

• Bend Allowance–All backgauge dimensions can be offset with one data entry up to ± .393˝

• Ram Depth Mode–Programmable in inches or millimeters from the flat metal calibration point. On most hydraulic pressbrakes, the top of stroke can be varied from bend to bend and a ram slow down point can be programmed for each job.

• Ram Offset–all of the Ram depths can be offset with one data entry up to ± .393˝

•Backgauge Retract/Delay–Backgauge can be programmed to retract away from the die a specified time and distance to allow the operator time to reposition the workpiece.

• Backgauge Retract on Pinch Point–On 2-axis hydraulic brakes this feature allows you to program the backgauge to retract once the workpiece is pinched in order to clear reverse bends. Both time and distance of retract can be programmed separately for each bend.

• Self Diagnostics–error codes appear for programming mistakes or system malfunction.